Model 1802 Portable Moisture Calibrator
The operating principle of the calibrator is to generate a continuous flow of low level (ppm) water vapour in a nitrogen carrier gas to be used to calibrate other moisture monitors. This device can also be used as a moisture analyser if required.
Dry nitrogen is fed through a bubbler, the flow rate being adjusted to deliver a constant flow of known ppm moisture in the stream. An internal analyser measures the moisture content and the instrument delivers up to 2 l/min moisture in nitrogen to an external moisture monitor which in turn can be calibrated or validated.
Instrument can be powered by mains or by rechargeable battery.
Suitable for calibrating or validating any moisture monitor in the 0-1,000 ppm by volume range.