電磁流量傳感器流量探針

The magnetic inductive flowsensors mag-flux MIS 1/D and mag-flux MIS 2/15 are suitable for velocity and flow measurements of nearly all elec-trically conductive fluids. In addition to the already well-known flow-meters mag-flux A, mag-flux S and mag-flux F5, they offer a well-priced option to your flow measuring applications.
Due to the constant magnetic field, the sensors mag-flux MIS 1/D and mag-flux MIS 2/15 can be used for flow rates up to 3 or 10 m/s (9.84 ft/s or 32.8 ft/s) respectively and a conductivity as low as 20 µS/cm. Temperature, pressure, density and viscosity do not affect the result of the measurement.
The complete measuring device comprises at least one magnetic inductive sensor and a dedicated transmitter. The units work on the principle of Faraday’s law of induction, whereby, simply stated, voltage is induced to a conductor which is moving through a magnetic field.

The magnetic inductive sensors mag-flux MIS 1/D and mag-flux MIS 2/15 are applied mainly in the following industries:


• Water and sewage plants 
• Steel industry 
• Energy industry, public utilities




 



規格:

Accuracy: +/- 0.3%, +/- 0.5%, +/- 1%
Repeatability: +/- 0.1%
Upstream and Downstream Straight Pipe Requirement: 0.5D ~ 2D ~ 5D
Turndown Ratio: 3:1 ~ 7:1 ~ 10:1
Permanent Pressure Loss: 1/2 ~ 1/3 against traditional orifice
Bi-directional Measurement

Noise Level: 1/15 of tradition orifice


Click here to download product catalogue